Applications
Total Global Solution
SatSmart’s Global Satellite/Cellular Data Communication System
is comprised of
Smart 3000D Unit
along with
SatSmart’s Application Internet Server.
This is a Worldwide Two-way Wireless Data
Communication System which enables the following main
features:
All those features can be managed by the customer through the
Internet. The interaction, accessibility and overall control
of these applications have never been this easy or affordable.
SatSmart’s solution provides low cost high-tech, on top of
Global coverage, are not enabled by cellular-only solutions.
Click here
to learn more about Smart 3000D System
SatSmart’s Global Satellite/Cellular Communication System
SatSmart’s Global Satellite/Cellular
Communication System is a sophisticated hardware and
software solution. The
Smart 3000D Unit
is installed on a marine vessel or any land mobile vehicle.
The Unit receives accurate positioning
signal from GPS satellites system. The
Unit establishes two-way data communication
with satellites, either a net of Iridium Low Earth
Orbit (LEO) satellites or Inmarsat GEO
Satellite Messaging Network
and, optionally, with GPRS Cellular Data
Communication.
The LEO or GEO satellites
communicate
with Satellite Ground Stations (Gateways)
located at various spots around the globe.
SatSmart’s Application Internet Server
communicates, via the Internet, with the Satellite Ground Stations,
and/or with the Cellular receivers (optional).
The SatSmart user, or anyone authorized by the user, can access
via the Internet, the
SatSmart’s Application Internet Server.
Here the user, or anyone authorized by the user, can track the
Unit’s location
(see where the Unit is located) read messages sent from the
Unit and write messages to the
Unit.
In addition, the user, or anyone authorized by the user, can see
the output of sensors connected to the
Unit (optional) and send Remote Commands
to the Unit which will apply those
commands to equipment connected to the Unit
(optional).
Click here
to learn more about Smart 3000D System
SatSmart’s Application Internet Server
SatSmart’s Application Internet Server
is the User’s
Control & Command Center. It enables the following
functions:
Tracking.
From here, the user, or anyone
authorized by the user, can
Track, or see, the location of the
Smart 3000D Unit, which is actually
the user’s remote asset where the
Unit is installed. The present and past
locations of the Unit, or the user’s
remote asset, is shown on a map, with the ability to zoom in
and out and measure distances on the map. For users having
few Smart 3000D Units, installed on
few remote assets, the user can see and track location of
each and every Unit, which is
the location of each and every remote asset.
Free Text Messaging.
The user can also read on
SatSmart’s Application Internet Server,
Messages sent from the
Unit.
Messages are Free Text Messages.
The user can also write and send Free Text
Messages from
SatSmart’s Application Internet Server
to the Unit. This is two-way Free Text
Messaging.
Emergency Alerts are pre-defined
signals sent from the Unit
by pressing defined buttons on the
Unit’s Panel.
Those Alarm Signals appear on
SatSmart’s Application Internet Server
and they can be sent automatically to any User’s e-mail
address(es), which can be an emergency service, towing service
or any other service the user will sign service subscription with.
Please bear in mind that signing any such service subscription is
the responsibility
of the user, since SatSmart does not
give any such services, other than
SatSmart’s Application Internet Server.
Remote Sensor Monitoring and
Data Retrieval
are options.
The user can connect the Smart 3000D Unit
to various sensors or data outputs of any device having such
outputs. The output of the sensors, or the data, can be seen on
SatSmart’s Application Internet Server
and it can also be sent automatically by e-mail to any e-mail address
defined by the user. Thus, the output of the sensors, or data, can be
monitored anywhere, without the need to first enter
SatSmart’s Application Internet Server.
Remote Commands is another possibility.
The user can send Commands to the
Smart 3000D Unit.
Commands can be
Tracking, to see the
Unit’s
present location, or to have the Unit
send its location at time intervals specified by the user,
or stop sending its location. When the
Smart 3000D Unit is connected by the user
to remote-activated appliance (optional), the user can send
activating and de-activating
Commands to those appliance.
Remote Commands can be sent from
SatSmart’s Application Internet Server
or by unique, pre-defined, e-mail messages sent from anywhere on the globe.
Click here
to learn more about Smart 3000D Telemetics Server
Two-way E-mail Messaging
The Smart 3000D Unit can send and receive
e-mail messages via a PC (not supplied by SatSmart) or Palm
Pilot (not supplied by SatSmart). This e-mail messaging can
be done from anywhere on the globe without the need to register
the Smart 3000D Unit to any Internet
Service Provider. Two-way e-mail messaging is a service provided
by SatSmart.
PC Interface
PC Interface is embedded in the
Smart 3000D Unit,
either directly or by a
supplied PC Adaptor -- depending on
the specific
Smart 3000D Unit specifications.
It enables
Two-way e-mail messaging and some
Remote Commands (optional) and some
Data Retrieval (optional).
Fleet Management Solutions
The Smart 3000D System is an integrated
hardware and software Fleet
Management platform, designed and operated by
SatSmart,
for the supply of fleet management services over the Internet.
The fleet manager, using a standard Internet connection, can have
permanent access to the data on his vehicles (position,
itinerary, status of on board sensors...) without
any technological complexity.
The Smart 3000D System is the most
immediate and easy to use system
for positioning and monitoring vehicles and for
Fleet Management
using the Internet. Any
Authorized User just has to connect to the
User Area of the SatSmart
Web Server using a browser on any
Internet-enabled computer to instantly get all the real time
information about the vehicles.
Click here
to learn more about Smart 3000D System
Asset Management Solutions
Global Asset Monitoring
is the process of viewing the location
and operating characteristics of your equipment from any
Internet-enabled computer. The data is presented in a secure
manner so only those you authorize can access your information.
Through the use of satellite technology,
you are able to monitor your equipment anywhere on earth.
Also, there is a dual-mode option. Dual-mode
Units (option), choose between Satellite communication and
GPRS Cellular Data Communication to reduce usage fee.
Click here
to learn more about Smart 3000D System
